 |
 |
TOYOTA
Celica,
Scion, Corolla, Corona, Cressida, RAV 4 |
 |
 |
 |
|
QUICKEST
/ BIGGEST ADJUSTMENT. . .
Unique K-MAC Patented design - CAN
RECORD STREET OR RACE SETTINGS and CHANGE
IN JUST 30 SECONDS - (time taken to loosen the 3 top nuts).
With K-MAC there's NO jacking/disassembly required and you can adjust
accurately (under load)! |
 |
| |
|
FRONT
CAMBER AND CASTER "STRUT" KITS
WHY K-MAC . . . |
|
| |
 |
Simply replaces upper
strut mounts - No modifications. |
|
|
Patented
design allows Quickest & Biggest
adjustment. |
| |
|
With K-MAC there is NO HEIGHT
INCREASE. |
| |
|
Can adjust accurately (under load). |
| |
|
Can install with factory diam.
coils or adjustable coil overs. |
|
| |
|
Stage 2/3 INCLUDE
EXTRA HEAVY DUTY self aligning (no side-load), Pillow ball
centers.(PTFE lined) |
|
|
|
|
|
|
|
| |
|
CAMBER: Essential
if altering height or expensive low profile tires fitted.
Reduces costly, premature, inner edge tire wear. Improves
traction.
K-MAC design also allows to easily change from Street to "extra"
Negative Camber for Performance or further improving Race lap times. |
CASTER: Increases Positive Caster for improved anti Dive/Lift on
brake/acceleration. Quicker turn in. Better steering response
and Hi-speed directional control. |
|
|
|
|
|
| |
| FRONT
KITS (Scroll down for "REAR" kits) |
| |
|
|
|
|
|
| |
|
Camber/Caster
adjuster kits
are available in
Stage 1, 2 and 3
to suit
Celica (1971 -2010)
Corolla (1970 - 1994)
Cressida (1994 -1999) |
| K-MAC
Stage 2/3 feature "Replaceable" centers for virtual
life time usage |
STAGE
1 (STREET)
Steel
with ball race thrust bearings and urethane centers
for
extended life, commuter use.
Category J $380-
pair.
STAGE
2 (STREET/RACE)
All alloy with extra H/Dutyself
align pillow balls (PTFE lined)
and urethane centers for extended life.
Category K $480-
pair.
STAGE
3 (FULL RACE)
All alloy with extra H/Duty self align pillow
ball centers but
no urethane
/flex for Tauter/Quicker response times, more effective
shock control.
Category K $480-
pair.
|
|
|
|
|
|
|
|
|
|
|
| |
Model |
Year |
Part
Number |
CELICA
1970 - 2011
|
ZZT230/231,
W130 |
'99-'11 |
#762416 1/2/3
|
AT80/200,
MA70/220/221, Soarer, Supra, ST182/184/185/202/204 |
'89-'99 |
#762116
1/2/3 |
AT160, ST162 |
'85-'89 |
#765016
1/2/3 |
RA/TA23/28/40, RA60/65,
SA63, Supra, MA61 |
'75-'86 |
#761316
1/2/3 |
RA/TA20/21/22/25/27 |
'71-'77 |
#761216
1/2/3 |
Above
Camber and Caster kits available in Stage 1/2/3 |
COROLLA
1970 - 2011 |
FWD/AWD
(Front Camber) $130- pair |
'94-'11 |
#120216 E
|
AE92/93/Seca |
'89-'94 |
#766216
1/2/3 |
KE70, AE70, AE71 |
'81-'86 |
#765016
1/2/3 |
KE30-55/60 |
'75-'81 |
#764516
1/2/3 |
KE18-26 |
'70-'75 |
#764116
1/2/3 |
Above (1970-1994)
Camber and Caster kits available in Stage 1/2/3 |
CRESSIDA 1994 -
1999 |
MX32/36/62/73/83 |
'94-'99 |
#760916 1/2/3 |
Above Cressida
Camber and Caster kits available in Stage 1/2/3 |
CORONA
1994 - 1999 |
RT/ST/XT(130-142)
(Front Camber) $130- pair |
'94-'99 |
#760816
E
|
SCION 2003 -
2010 |
xB, tC, xD |
'03-'11 |
#762416 1/2/3 |
RAV 4 1994 - 2010 |
All models (Front Camber) |
'94-'11 |
#120216 E
|
With
K-MAC Patented design . . .
NO
under size Crank bolts used
|
$130
pair.
Provides up to 1.75 degrees of
(POS. / NEG) Camber |
 |
|
|
|
|
|
|
|
|
|
REAR
KITS |
| |
|
|
|
|
|
| |
| CELICA
1989 - 2011 |
ZZT230/231,
W130 Scion
(Rear Camber) $130- pair |
'99-'09 |
#120216 E
|
AT80/200,
MA70/220/221, Soarer, Supra, ST182/184/185/202/204
(Rear
Camber) $130- pair |
'89-'99 |
#120216 E
|
| |
COROLLA
1994 - 2001 |
FWD/4WD
(Rear Camber) $130- pair |
'94-'01 |
#120216 E
|
SCION
2003 - 2011 |
xB,
tC, xD (Rear Camber) $130- pair |
'03-'11 |
#120216
E
|
RAV
4 1994 - 2011 |
RAV
4 (Rear Camber) $210- pair |
'06
- '11 |
#767126 F
|
Replaces
outer front control arm bushes providing up to 2 degrees.
of
(POS. / NEG) Camber. |
RAV
4 (Rear Camber) $345- pair |
95 - 05 |
#767026 i
|
Simply
replaces lower rear control arms. Manufactured from Ultimate
Chrome - Moly aircraft grade tube.Fast Turnbuckle adjustment
- accurate (under load).
Provides virtually unlimited range
no matter how much lowered -
even if fully slammed!
 |
|
|
|
| |
| |
WITH
K-MAC YOU ARE DEALING WITH "ACTUAL" MANUFACTURERS !
(Virtually all other companies only source
cheap imports and re-label) |
 K-MAC
ITS ELEMENTARY . . . "Simply
The Best" through IN-HOUSE
manufacture allowing TOTAL CONTROL OVER QUALITY
and with it rapid / constant design improvements !
 ITS NO WONDER THEREFORE
. . . K-MAC
with 46 years design
experience is recognized in the Race industry
as No. 1 . . . the
company that can be relied on to always
design/supply the
Highest Quality Bushes and the
Biggest (and Quickest)
range
of Camber and Caster adjustment.
RETURN
TO SEARCH BY MAKE PAGE
|
Leaders
in Suspension Engineering Since 1964! |
