ALL
THE (Race Winning) CRITICAL COMPONENTS
|
|
FORD
MUSTANG
2005 - 2010 (also
'88-'04, '64-'73)
(No
adjustments ex-factory) |
|
 |
|
 |
QUICKEST
/ BIGGEST ADJUSTMENT. . . Unique
K-MAC Patented design - CAN
RECORD STREET OR RACE SETTINGS and CHANGE
IN JUST 30 SECONDS - (time taken to loosen the 4 top nuts).
With K-MAC there's NO jacking/disassembly required and you can
adjust accurately (under load)! |
|
| |
|
FRONT
CAMBER AND CASTER "STRUT" KITS
WHY K-MAC . . . |
|
| |
 |
Simply replaces upper
strut mounts - No modifications. |
|
|
Patented
design allows Quickest & Biggest
adjustment. |
| |
|
With K-MAC there is NO HEIGHT
INCREASE. |
| |
|
Can adjust accurately (under load). |
| |
|
Can install with factory diam.
coils or adjustable coil overs. |
|
| |
|
Stage 2/3 INCLUDE
EXTRA HEAVY DUTY self aligning (no side-load), Pillow ball
centers.(PTFE lined) |
|
|
|
|
|
|
|
| |
|
CAMBER: Essential
if altering height or expensive low profile tires fitted.
Reduces costly, premature, inner edge tire wear. Improves
traction.
K-MAC design also allows to easily change from Street to "extra"
Negative Camber for Performance or further improving Race lap times. |
CASTER: Increases Positive Caster for improved anti Dive/Lift on
brake/acceleration. Quicker turn in. Better steering response
and Hi-speed directional control. |
|
|
|
|
|
|
|
|
|
|
|
|
FRONT
KITS (Camber and Caster) |
Front
Bolt-on 'Patented' Top of Strut System - Camber & Caster.
Simply replaces upper mounts. |
|
| K-MAC
Biggest/Quickest Adjustment Range (Patented) |
|
2005
- 2010 Front Camber & Caster kit
K-MAC kit includes special factory diameter top coil seats so
height is not increased. Also kit can be fitted if small diam. Coil -
overs used.
#182716 K $465.00
(pair) |
 |
Note: Each kit includes
both urethane centers Stage 2 (Street/Race)
and also solid for Stage 3 (Full Race) |
K-MAC also
manufacture front Camber & Caster
adjuster kits for all earlier Mustangs,
1988 - 2004 - Replaces the lower inner control arm bushes.
1964 - 1973 - Replaces the inner control arm bolts with
eccentric washers and weld on outer channel support brackets.
K-MAC patented design allows precise single wrench adjustment
(accurately under load) direct on alignment turntable.
Bush extraction / insertion tools included.
Also resolves premature failure - rattles / squeaks.
K-MAC ultimate designs (bush design experience since 1964). |
|
|
| 1998
- 2004 |
#182416
J |
$370.00
(set 4) |
 |
| 1994
- 1997 |
#182316
J |
$370.00
(set 4) |
| 1988
- 1993 |
#182216
J |
$370.00
(set 4) |
|
| 1964
- 1973 |
#182016 |
|
|
|
|
|
|
|
|
|
|
|
|
| |
WITH
K-MAC YOU ARE DEALING WITH "ACTUAL" MANUFACTURERS !
(Virtually all other companys only
source cheap imports and re-label) |
 K-MAC
ITS ELEMENTARY . . . "Simply The Best" through
IN-HOUSE
manufacture allowing TOTAL CONTROL OVER QUALITY
and with it rapid / constant design improvements !
ITS NO WONDER THEREFORE
. . . K-MAC
is recognized
in the Race
industry as No. 1 . . . the company that can be
relied on
to always supply the Biggest (and Quickest) range of
Camber and Caster adjustment.
RETURN
TO SEARCH BY MAKE PAGE
|
Leaders in
Suspension Engineering Since 1964! |
