K-MAC - Leaders in Suspension Engineering Since 1964
 
New Products
Datsun Logo
ALL THE (Race Winning) CRITICAL COMPONENTS
DATSUN  240Z, 260Z, 280Z
Also Front & Rear kits for . . . 510, 610, B210, 240K, C210, R30, Bluebird, Skyline, Stanza, Sunny      
When Your Serious
Kit that fit Right
At Last Street or Race
K-MAC Stage 2/3 feature "Replaceable" centers for virtual life time usage
QUICKEST / BIGGEST ADJUSTMENT. . .

Unique K-MAC Patented design - CAN RECORD STREET OR RACE SETTINGS and CHANGE IN JUST 30 SECONDS - (time taken to loosen the 3 top nuts). With K-MAC there's NO jacking/disassembly required and you can adjust accurately (under load)!

   
FRONT CAMBER AND CASTER "STRUT" KITS
WHY K-MAC . . .
Checklist Button
  tick
Simply replaces upper strut mounts - No modifications.
tick
Patented design allows Quickest & Biggest adjustment.
  tick
With K-MAC there is NO HEIGHT INCREASE.
  tick
Can adjust accurately (under load).
  tick
Can install with factory diam. coils or adjustable coil overs.
  tick
Stage 2/3 INCLUDE EXTRA HEAVY DUTY self aligning (no side-load), Pillow ball centers.(PTFE lined)
 
Camber
CAMBER:  Essential if altering height or expensive low profile tires fitted.
Reduces  costly,  premature,  inner  edge  tire  wear.  Improves traction.
K-MAC  design  also  allows  to  easily  change  from   Street   to  "extra"
Negative Camber for Performance or further improving  Race  lap  times.
  CASTER:   Increases  Positive  Caster  for  improved  anti  Dive/Lift  on
  brake/acceleration.      Quicker  turn  in.     Better   steering   response
  and  Hi-speed  directional  control.
Caster
FRONT KITS (Scroll down for "REAR" kits)
 
240Z, 260Z, 280Z      '69 - 6/78
Neg. Camber (Pos. or Neg Caster)
#541016 K3
$480 - pair
Buy Button
Pos. Camber (Pos. or Neg Caster)
#541026 K3
$480 - pair
Buy Button

#541016 / #541026
only available in Stage 3.

Steel with extra h/duty pillow ball centers (PTFE lined). Centers are replaceable for virtual lifetime usage.

K-MAC (Patented design)

Only replacement top mount kit
to provide adequate Camber
(and Caster) adjustment.
Like all K-MAC kits "Bolt-on"
no modifications.


Also available K-MAC (Patented)
Coil-over "Coil Jacker"
conversion kit
(2 1/2" / 64mm I.D Coil Springs).

Click for more infomation
Also see below for Rear Kits
Model
Year
Part Number
Price
280ZX
7/78-'83
#541116 J 1/2/3
$380- pair
Buy Button
300ZX (Z31)
'84-'89
#541316 J 1/2/3
$380- pair
Buy Button
510, 610, 1600, 180B, 200B,
240K, C210, R30
'68-'85
#540516 J 1/2/3
$380- pair
Buy Button
R31, Pintara, Skyline
'86-'97
#541816 J 1/2/3
$380- pair
Buy Button
Bluebird
'81-'86
#540716 K -/2/3
$480- pair
Buy Button
Sunny, B210, 1200, 120Y
'78-'82
#540816 J 1/2/3
$380- pair
Buy Button
Stanza
'78-'83
#540616 J 1/2/3
$380- pair
Buy Button

Available in Stage 1,2 or 3.
Quickest and Biggest adjustment range.
Fit with or without Coil-overs.

Stage 2 & 3 feature replaceable centers
for virtual lifetime usage.

When ordering quote
Stage 1/2/3 after Part No.

• Stage 1      
(Price category J - $380)
• Stage 2/3
(Price Category K - $480)


300ZX (Z32)
'89-'96
#541416 K3
$480- pair
Buy Button
Datsun 300ZX Camber Kit
Camber adjuster kit:

K-MAC - Strongest design Race/Rally
proven. Replacement top control arms.
Because of extreme side load most other
brands suffer from premature failure.

300ZX (Z32)
'89-'96
#541516 F
$210- pair
Buy Button
#541516 F#541516 F Replacement front Caster bushes.

K-MAC patented design allows precise
single wrench adjustment.

 
REAR KITS
240Z, 260Z, 280Z      '69 - 6/78
Neg. Camber (Pos. or Neg Caster)
#541026 K3
$480 - pair
Buy Button
Pos. Camber (Pos. or Neg Caster)
#541016 K3
$480 - pair
Buy Button

#541016 / #541026
only available in Stage 3.

Steel with extra h/duty pillow ball centers (PTFE lined). Centers are replaceable for virtual lifetime usage.

K-MAC (Patented design)

Only replacement top mount kit
to provide adequate Camber
(and Caster) adjustment.
Like all K-MAC kits "Bolt-on"
no modifications.

Also available K-MAC (Patented)
Coil-over "Coil Jacker"
conversion kit
(2 1/2" / 64mm I.D Coil Springs).

Click for more infomation

Model
Year
Part Number
Price
280ZX
7/78-'83
#540526 H
$320- set 4
Buy Button
300ZX (Z31)
'95-'99
#541326 H
$320- set 4
Buy Button
K-MAC kit replaces the 4
trail arm to crossmember bushes.

Unique patented design provides
single wrench / precise /
maximum adjustment.
Bush extraction tool supplied.

300ZX (Z32)
'89-'96
#542026 H
$320- set 4
Buy Button
K-MAC kit replaces the upper and lower inner control arm bushes.
Unique patented design. Provides single wrench / precise / maximum adjustment.
Bush extraction tool provided.

510, 610, 180B, Skyline, R30, C210
'68-'88
#540526 H
$320- set 4
Buy Button
R31 (independent rear)
'89-'91
#541716 H
$320- set 4
Buy Button
K-MAC kit replaces the 4
trail arm to crossmember bushes.

Unique patented design provides
single wrench / precise /
maximum adjustment.
Bush extraction tool supplied.

200SX, Gazelle, Silvia (S12)
'83-'89
#540526 H
$320- set 4
Buy Button
180SX, Silvia (S13, S14)
'89-'00
#541826 H
$320- set 4
Buy Button
200SX, Silvia (S15)
'00-'02
#541926 H
$320- set 4
Buy Button
K-MAC kit replaces the upper and lower inner control arm bushes.
Unique patented design. Provides single wrench / precise / maximum adjustment.
Bush extraction tool provided.

 
WITH K-MAC YOU ARE DEALING WITH "ACTUAL" MANUFACTURERS !
(Virtually all other companies only source cheap imports and re-label)
    K-MAC ITS ELEMENTARY . . .   "Simply The Best" through IN-HOUSE
manufacture allowing TOTAL CONTROL OVER QUALITY
and with it rapid / constant design improvements !

   dot ITS  NO  WONDER  THEREFORE . . .       K-MAC with 46 years design
    experience is recognized in the Race industry as No. 1 . . .   the
       company that can be relied on to always design/supply the
         Highest Quality Bushes and the Biggest (and Quickest)
range of Camber and Caster adjustment.

RETURN TO SEARCH BY MAKE PAGE

Leaders in Suspension Engineering Since 1964!
K-Mac Video
 
    Dealers1 Copyright © 2011
K-Mac Engineering Pty Ltd